VYCOM SANATEC® LITE HDPE

Sanatec PP Sanatec Sanatec Lite 0.9 Max.01 78 0.960 Max 0.01 69 0.8 Max 0.01 69 4900 190000 0.9 9 4600 225000 120 600 3200 228000 305 210 6.5x10-5 180 129 82 6x10-5 180F 129 82 6x10-5 180F Physical Density gcm Absorption Hardness Shore D Mechanical Tensile Strength Yield psi Flexural Modulus psi Notched Izod Impact fl-lbin Elongation at Yeild Thermal Vicat Softening Point C Heat Deflection Temperature 66 psi C Coefficient of Linear Thermal Expansion In.In.C Maximum Service Temperature Air C Physical properties of plastic sheeting are represented as Typical. Information contained herein is considered accurate to the best of our knowledge. It is offered for your consideration and investigation and is not to be construed as a representation or warranty expressed or implied. Our warranties are limited to those expressly stated in formal contracts or in conditions of sale on our invoices and order acceptances. Conditions and methods of use may vary and are beyond the control of Vycom therefore Vycom disclaims any liability incurred as a result of the use of this product in accordance with the data contained in our physical property charts. No information herein shall be construed as an offer of indemnity for infringement or as a recommendation to use the products in such a manner as to infringe any patent domestic or foreign. Effective Date January 1st 2016 The Typical properties of our plastic sheet cannot be automatically used when engineering finished components and the fabricator or end user is responsible for insuring the suitability of our products for their specific application or end use 600