Skip to content
Piedmont Plastics

Skyrol® SG00

Skyrol Polyester Film SG00 Product Information Product Description Skyrol SG00 is an untreated slightly rough-surfaced and hazy polyester film to enhance handling and runnability. SG00 is available in a wide range of thickness from 60ga to 1000ga and is extensively used for drafting release sheet lamination protection collar stay. dust cap and general purpose applications. SG00 film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 f. Typical Properties Unit Property Value Test Method General Nominal Thickness Gauge 60 15 75 19 92 23 142 36 SKC Method Mechanical Tensile Strength Kpsi MD TD 43.0 40.0 40.0 38.0 35.0 37.5 33.0 34.5 ASTM D882 Elongation At Break MD TD 125 110 130 115 140 120 150 120 ASTM D882 Coefficient of Friction k Kinetic s Static 0.32 0.37 0.32 0.37 0.32 0.37 0.32 0.37 ASTM D1894 Surface Tension Dyne 45 45 45 45 ASTM D2578 3.2 89.8 161.0 3.5 89.5 160.5 3.8 89.3 160.5 4.8 89.1 157.5 ASTM D1003 ASTM D1003 ASTM D523 ASTM D 1003 1.7 1.5 1.7 1.5 1.6 1.5 1.5 0.6 SKC Method 150C30 min Surface Optical Haze Light Transmission Gloss Thermal Heat Shrinkage MD TD Unit Correlation Nmm2 Kgmm2 X 9.8 Kgmm2 Kpi 1.4223 This Information is the best currently available on the subject. The results should however only be regarded as a general guide to material properties and not as a guarantee. Some of the properties can be changed as a result of suppliers efforts to improve the quality or production efficiecy of the subject. 0 Note Please read the Material Safty Data SheetMSDS carefully prior to use. Unit Correlation Nmm2 mm2 9.8 SKCA-E-10 Skyrol Polyester Film SG00 60ga Product Information Product Description Skyrol SG00 is a slightly rough-surfaced and hazy polyester film to enhance handling and runnability. SG00 film is available in a wide range of thickness from 60ga up to 1000ga and is extensively used for drafting release sheet lamination protection collar stay dust cap and general purpose applications. SG00 fil

m is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 f. ASTM D 1003 Typical Properties Property Unit Value Test Method Gauge m 60 15 SKC Method Tensile Strength psi MD Kgmm 2 TD 43000 30 40000 28 ASTM D 882 Elongation At Break 125 110 ASTM D 882 k Kinetic s Static 0.32 0.37 ASTM D1894 Dyne 45 ASTM D 2578 Haze 3.2 ASTM D 1003 Light Transmission 89.8 ASTM D 1003 Gloss 161 ASTM D 523 1.7 1.5 SKC Method 150C30 min General Nominal Thickness Mechanical MD TD Surface Coefficient of Friction Surface Tension Optical Thermal Heat Shrinkage MD TD Unit Correlation Nmm2 Kgmm2 9.8 Kgmm2 psi 1422.3 SKCA-E-10 This Information is the best currently available on the subject. The results should however only be regarded as a general guide to material properties and not as a guarantee. Some of the properties can be changed as a result of suppliers efforts to improve the quality or production efficiecy of the subject. Note Please read the Material Safty Data SheetMSDS carefully prior to use.