NP510A TECHNICAL DATA BULLETIN GRADE NP510A NEMA LI 1-1998 Grade FR-4 U.L. LISTED Y DESCRIPTION NP510A is a woven glass fabric composite combined with epoxy resin system. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-2476827 Type GEE-F ANSINEMA IM 60000-2021 Grade FR-4 IEC 60893-3-2 PE GC 202 ASTM D709 Type FR-4 and IPC 410121. TYPICAL PROPERTIES VALUE Thickness Tested 0.125 UNITS 0.0625 0.500 PHYSICAL PROPERTIES Specific Gravity ASTM D792 Rockwell Hardness ASTM D785 Moisture Absorption ASTM D570 Flexural Strength ASTM D790 Flexural Modulus ASTM D790 Tensile Strength ASTM D638 Izod Impact Strength ASTM D256 Compressive Strength ASTM D695 Bonding Strength ASTM D229 Shear Strength ASTM D732 Norplex-Micarta 0.250 Build-up M Scale Condition D1-2423 Condition A LW CW Condition A LW CW Condition A LW CW Condition A LW CW Condition E-4850 LW CW Condition A Flatwise Condition A psi MPa kpsi GPa psi MPa ft-lbin Jcm ft-lbin Jcm psi MPa lb kg psi MPa Condition A Perpendicular Page 1 of 2 1.85 98 0.10 65000 52000 448.2 358.5 2900 2600 20.0 17.9 40000 32000 275.8 220.6 7.90 7.30 4.22 3.90 66000 455.1 2300 1043.3 21500 148.2 7142022 TECHNICAL DATA BULLETIN GRADE NP510A NEMA LI 1-1998 Grade FR-4 U.L. LISTED Y TYPICAL PROPERTIES continued UNITS 0.0625 VALUE Thickness Tested 0.125 0.500 THERMAL PROPERTIES 1 Temperature Index UL Bulletin 746b Electrical Mechanical Coefficient of Thermal Expansion IPC-TM 650-2.4.24 X-axis Y-axis Tg by DMA C C x10-6 130 140 10.0 13.0 C Flammability Vertical UL Bulletin 94 130 Condition A Class V-0 - 0.032 - 4.80 ELECTRICAL PROPERTIES Dissipation Factor 1 MHz ASTM D150 Condition A Relative Permittivity 1 MHz ASTM D150 Condition A Breakdown Voltage ASTM D149 Condition A Condition D-2423 Condition D-2423 Condition D-4850 Electric Strength ASTM D149 Condition A Condition D-4850 Arc Resistance ASTM D495 kVolts kVolts Voltsmil kVcm Voltsmil kVcm 66 65 630 248.0 670 263.8 Condition A sec 130
1 1 This temperature is a recommendation only and based upon experience in various applications. The maximum T operating temperature is dependent upon the application and should be investigated prior to use. h2 Only applies to thicknesses greater than 0.029. This data while believed to be accurate and based on reliable analytical methods is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are typical values not to be considered specification values. To assure the materials performance is adequate for a specific application customers should verify independent of Norplex-Micarta performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB and are urged to check with Customer Service or preferably our web site www.norplex-micarta.com to determine if the information is the most current available. Specification writers Contact Norplex-Micarta for specification values before submission. Norplex-Micarta Page 2 of 2 7142022
