Technical Data Sheet NECAL 9170 PRESSURE SENSITIVE ADHESIVE DESCRIPTION NECAL 9170 is an unsupported lm of pressure sensitive adhesive displaying excellent bond characteristics high clarity and good initial tack. It is an excellent option for decals membrane switches overlays industrial transfer tapes multi-purpose laminations. This adhesive is used in Appliance Automotive Transportation Industrial Equipment Recreational Equipment and Electronic Applications. FEATURES NECAL 9170 will adhere to many substrates including aluminum brass steel glass enamels and plastics such as polystyrene ABS and acrylic. Because of its thickness NECAL 9170 is recommended for use on rough surfaces. PHYSICAL PROPERTIES Thickness without liner Release Liner 180 Peel from Stainless Steel Loop tack from Stainless Steel Shear Adhesion Temperature Range 2.0 mils acrylic adhesive Available with P W H J HD VF P1 HD-2 or W1 liners 3 lbs. after 16-hour dwell PSTC-101 3 lbs. PSTC-16 7 days 1-inch x 1-inch x 1000 g 72F Application 50F. Minimum Service -20F. Minimum Short Term minuteshours 400F. Long Term daysweeks 300F. All tests conducted with a 2 mil PET backing BONDING INSTRUCTIONS Remove the release liner and apply to a clean dry substrate. Use rm pressure to obtain maximum contact. Increasing application force will optimize bond strength to surface. The adhesive will reach maximum bond after 72 hours. STORAGE DATA The shelf life of this material is at least two years when stored at 72F and 50 relative humidity. Increased temperatures andor humidity will aect performance characteristics. NOTICE The information shown here represents typical values which may vary with each application. The values are not intended to be a performance guarantee and are not intended to be utilized for se ing specications. Users should determine prior to use the suitability of this material for their application. Standard UL 969 System Materials PGGU2. Oct. 2020