MC511AF TECHNICAL DATA BULLETIN GRADE MC511AF NEMA LI 1-1998 Grade G-11 U.L. LISTED N DESCRIPTION MC511AF is a high strength medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150C. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to ANSINEMA IM 60000-2021 Grade G-11 MIL-I-247683 Type GEB ASTM D 709 Type IV Grade G-11 and IEC-60893-3-2 EP GC 203. TYPICAL PROPERTIES VALUE Thickness Tested 0.125 UNITS 0.0625 0.500 PHYSICAL PROPERTIES Specific Gravity ASTM D792 Rockwell Hardness ASTM D785 Moisture Absorption ASTM D570 Flexural Strength ASTM D790 Tensile Strength ASTM D638 Izod Impact Strength ASTM D256 Compressive Strength ASTM D695 Bonding Strength ASTM D229 Shear Strength ASTM D732 Norplex-Micarta 0.250 Build-up M Scale Condition D1-2423 Condition A LW CW Condition E-1150 T-150 LW CW Condition A LW CW Condition A LW CW Condition E-4850 LW CW Condition A Flatwise Condition A psi MPa psi MPa psi MPa ft-lbin Jcm ft-lbin Jcm psi MPa lb kg psi MPa Condition A Perpendicular Page 1 of 2 1.91 110 0.09 70000 60000 482.6 413.7 30000 206.8 41000 38000 282.7 262.0 10.00 10.00 5.34 5.34 50000 344.7 2200 997.9 21000 144.8 7142022 TECHNICAL DATA BULLETIN GRADE MC511AF NEMA LI 1-1998 Grade G-11 U.L. LISTED N TYPICAL PROPERTIES continued UNITS 0.0625 VALUE Thickness Tested 0.125 0.500 THERMAL PROPERTIES Temperature Index UL Bulletin 746b Tg by DMA 1 Electrical Mechanical C 170 180 C Flammability Rating UL Bulletin 94 180 Condition A Class HB - 0.019 - 4.50 kVolts Voltsmil kVcm 65 550 216.5 ELECTRICAL PROPERTIES Dissipation Factor 1 MHz ASTM D150 Condition A Relative Permittivity 1 MHz ASTM D150 Condition A Condition D-2423 Condition D-2423 Breakdown Voltage Condition A ASTM D149 Electric Strength Condition A ASTM D149 Arc Resistance Condition A ASTM D495 Comparative Tracking In
dex ASTM D3638 sec 185 Volts 600 1 1 This temperature is a recommendation only and based upon experience in various applications. The maximum T operating temperature is dependent upon the application and should be investigated prior to use. h This data while believed to be accurate and based on reliable analytical methods is for informational purposes only. The terms and conditions of the agreement under which it is sold will govern any sales of this product. Data supplied above are typical values not to be considered specification values. To assure the materials performance is adequate for a specific application customers should verify independent of Norplex-Micarta performance characteristics of interest. It is the responsibility of the users of this information to make sure that they have the latest version of this TDB and are urged to check with Customer Service or preferably our web site www.norplex-micarta.com to determine if the information is the most current available. Specification writers Contact Norplex-Micarta for specification values before submission. Norplex-Micarta Page 2 of 2 7142022
