HYDEX 202 natural - Stock Shapes rods plates tubes Chemical Designation PU Polyurethane Main features high dimensional stability broad chemical compatibility good impact strength good mechanical properties easy to machine Colour beige Density 1.2 gcm3 Target Industries medical technology chemical technology fixture construction pharmaceutical industry oil and gas industry process engineering Mechanical properties condition value Modulus of elasticity tensile test 73 F 240000 psi ASTM D 638 Tensile strength at yield 73 F 9000 psi ASTM D 638 Tensile strength at break 73 F 8000 psi ASTM D 638 Elongation at break tensile test 73 F 80 ASTM D 638 Flexural strength 73 F 12000 psi ASTM D 790 Modulus of elasticity flexural test 73 F 260000 psi ASTM D 790 Compression strength 73 F 1 strain 1200 psi ASTM D 695 Compression strength 73 F 10 strain 12000 psi ASTM D 695 Compression modulus 73 F 180000 psi ASTM D 695 Impact strength Izod 73 F 10 ft-lbsin ASTM D 256 Rockwell hardness M Scale 88 ASTM D 785 Coefficient of friction Static vs. steel 0.26 ASTM D 3702 Coefficient of friction Dynamic vs. steel 0.22 ASTM D 3702 Thermal properties condition value Vicat softening point test method test method 292 F ASTM D 1525 Deflection temperature 66 psi 290 F ASTM D 648 Deflection temperature 264 psi 280 F ASTM D 648 Service temperature 280 F - Thermal expansion CLTE 3.710 -5 ininF ASTM D 696 Other properties condition value Moisture absorption 24 hrs 73 F 0.12 test method comment comment comment ASTM D 570 Resin specification Ensinger Internal Specification Shapes specification NONE This information reflects the current state of our knowledge and is intended only to assist and advise. It is given without obligation or liability. It does not assure or guarantee chemical resistance quality of products or their suitability in any legally binding way. Values are not minimum or maximum values but guidelines that can be used for comparative purposes in material selection. They are
within the normal range of product properties and do not represent guaranteed property values. Testing under individual application circumstances is always recommended. Data is obtained from extruded shapes material unless otherwise noted. References to FDA compliance refer to the resins from which the products were made unless otherwise noted. All trade and patent rights should be observed. All rights reserved. Data sheet values are subject to periodic review the most recent update can be found at www.ensingerplastics.com. Ensinger Inc. Headquarters 365 Meadowlands Boulevard Washington PA 15301 USA Phone 800-243-3221 Sales Phone 800-869-4029 Technical Fax 724-746-9209 salesensingerusa.com Date 20161024 Version A0
