SPECIFICATION SHEETS PRODUCT NAME NIJ Level IIIA - Secur-Tem Poly PRODUCT CODE SP412 PERFORMANCE TESTING Ballistic CONSTRUCTION Product construction is proprietary. This product is glass-clad polycarbonate and contains an exposed polycarbonate surface with an abrasion resistant coating on the witness safe side. THICKNESS 1.220 Nominal THICKNESS TOLERANCE 1.130 1.310 WEIGHT 14.5 Lbs. Square Foot SIZE 60 x 96 12 x 12 OPTIONS Tinted glass translucent interlayers transparent mirror Low Iron glass TECHNICAL DATA U-Value .81 Solar Heat Gain Co-efficient .60 Light Transmission .75 APPLICABLE STANDARDS ANSI Z97.1 CPSC 16 CFR 1201 Category I and II ASTM C 1036 ASTM C 1349 SINGLE RESPONSIBILITY Global Security Glazing products are covered by our Single Responsibility Program that ensures one firm has handled and is accountable for all phases of manufacturing. INSTALLATION Glass must be installed in a Bullet Resistant frame system. Holes must be covered with a ballistic rated device. All glass should be installed in accordance with the guidelines set forth in the current edition of the Glass Association of North America GANA Glazing and Sealant Manuals. Glazing systems should incorporate a weep system to allow moisture and water to escape the glazing channel. Recommended Clearance Face 18 per side Edge 38 Bite 1 National Institute of Justice- 0108.01- Level IIIA .44 Magnum Lead Semi-Wadcutter Gas Checked 9mm Full Metal jacket No Spall No Penetration Maximum Minimum 616 Selfield Road - Selma Alabama 36703 Tel 800-633-2513 - Fax 334-875-2704 www.security-glazing.com B013A 408
