Global Security Glazing Lexgard® MP 1000

SPECIFICATION SHEETS PRODUCT NAME Lexgard MP1000 PRODUCT CODE MP1000 PERFORMANCE TESTING Forced Entry Ballistic ASTM F1 233 Class V HP White Level IV- TP-0500.02 UL 752- Level 2 UL Listed File BP844 .357 Magnum Jacketed Lead Soft Point No Spall No Penetration CONSTRUCTION This product is laminated polycarbonate and contains exposed polycarbonate surfaces with abrasion resistant coatings on both sides. THICKNESS 1 Nominal 1.03 THICKNESS TOLERANCE .930 1.130 WEIGHT 6.41 Lbs. Square Foot SIZE 72 x 96 12 x 12 OPTIONS Bronze gray green tint TECHNICAL DATA U-Value .68 Solar Heat Gain Co-efficient .88 Light Transmission .65 APPLICABLE STANDARDS ANSI Z97.1 CPSC 16 CFR 1201 Category I and II ASTM C 1036 ASTM C 1172 SINGLE RESPONSIBILITY Global Security Glazing products are covered by our Single Responsibility Program that ensures one firm has handled and is accountable for all phases of manufacturing. INSTALLATION When used for ballistic protection glazing should be installed in a UL Level 2 Bullet Resistant frame system. Holes must be covered with a UL listed device. All glass should be installed in accordance with the guidelines set forth in the current edition of the Glass Association of North America GANA Glazing and Sealant Manuals. Glazing systems should incorporate a weep system to allow moisture and water to escape the glazing channel. Recommended Clearance Face 18 per side Edge 14 Bite 1 616 Selfield Road - Selma Alabama 36703 Tel 800-633-2513 - Fax 334-875-2704 www.security-glazing.com Maximum Minimum for UL Ballistic Rating DB012A 408