General Formulations Concept® 201-HTAP
Product Bulletin GF 110 Commercial Grade Dry Erase Film Permanent Adhesive GF 110 EraseMark Pro is a 2-mil clear polyester laminate with a high performance hard coated engineered surface. The scratch and abrasion resistant polyester film is coated with a permanent solvent acrylic pressure sensitive adhesive on a smooth paper liner. This film works well with quality dry erase markers and its anti-graffiti properties allows for easy removal of permeant markers and crayons. GF 110 EraseMark Pro has a 5 year interior durability with proper care and cleaning. Applications This product is recommended for producing high quality long term dry erase boards typically found in hospitals retail establishments restaurants and schools. GF 110 EraseMark Pro is a great alternative to replacing whiteboards due to its ease clean anti-ghosting and yellowing properties. Combine with WallMark 226 6.0 mil matte white and makes virtually any surface into a dry ease board. Typical substrates are printed photo papers printed vinyls and unprinted substrates. This product is also resistance to permanent or semi-permanent markers and crayons and can be cleaned with rubbing or isopropyl alcohol. For best results we suggest the following dry erase brand marking pens Expo Scents chisel point Expo Bold color chisel Point Expo regular chisel point brand marking pens. It is recommended to use a microfiber cloth to clean the films surface. Do not use any chalkboard or felt erasers as this may damage the surface long term. Clean with soapy water and dry with soft microfiber cloth. Ensure no soapy residue is left. To help keep your laminate surface clean and ghost free we recommend using Remooble whiteboard renew. It safely cleans white board surfaces and tough stains. Get more info at www.remooble.com. Thickness Water Resistance Humidity Resistance Storage Stability Film 2.0 mils. Adhesive 0.8 to 1.0 mils. Liner 4.0 mils. Thickness variance - 10 Film can react to heat in processing. In laminating pro
cess do not use excessive unwind tension or nip roll pressure as curl could result. Minimum application temperature 40F. Service temperature is -40F to 200F. Not intended for outdoor use. Designed for interior use only. to stainless steel 48 ozin. PSTC-1 with 24-hour dwell at 70F and 50 relative humidity. Typical values. Individual values may vary. Test thoroughly before production. Good. Immersion not recommended. Good 1-year shelf life when stored at 70F and 50 relative humidity. Product Code 110-54 54x150 Dimensional Stability Temperature Ranges Expected Exterior Life Adhesion Manufacturers of Pressure Sensitive Films We believe the information on this product to be accurate. However since we cannot anticipate or control the conditions under which this information or our products may be used we cannot guarantee results obtained through their use. Tests of our products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty either express or implied. The purchaser should refer to General Formulations Incs Price List for Terms and Conditions or Sale Including Disclaimer of Warranties and Limitation of Liability.