General Formulations Concept® 103
Product Bulletin Concept 101 LUSTRE OVERLAMINATING FILM Concept Lustre Overlaminating Film 101 is a pressure sensitive 3-mil lustre PVC film with the optically clear 200-4990 permanent acrylic adhesive on a smooth paper liner. This vinyl film offers protection from abrasion moisture and other environmental exposures. It is laminated by the cold laminating process without the addition of heat. Applications Lustre overlaminating film is designed to protect digital image prints and screen printed images for exhibit and display graphics. Can be used in most instances where an overlay with a semi-gloss finish is required. Thickness Film 3.0 mils. Adhesive .8 to 1.0 mil. Liner 4.0 mils. Thickness variance - 10 Dimensional Stability Good. Temperature Ranges Minimum application temperature Service temperature range 40 F -40F to 180F. Expected Exterior Exposure This product is designed for interior applications. Exterior resistance has not been determined. Adhesion To stainless steel 48 ozin. Tested according to PSTC-101 Method A procedures. 24 hr. dwell at 70F and 50 relative humidity. Typical values. Individual values may vary. Test thoroughly before production. Light Transmission Approximately 87 Gloss 60 Gardner-MD Initial 30-50 Storage Stability 1-year shelf life when stored at 70F and 50 relative humidity. Product Series 101-31 101-39 101-52 101-515 101-55 101-61 31 x 150 roll 38 x 150 roll 51 x 150 roll 51 x 400 roll 54 x 150 roll 61 x 150 roll Manufacturer of Pressure Sensitive Films Traffic Graffic Floor Advertising Films Custom Coatings and Printing Inks. 309 S. Union P.O. Box 158 Sparta Michigan 49345 616 887-7387 800253-3664 FAX 616887-0537 Web Site www.generalformulations.com e-mail gfiinfogeneralformulations.com We believe the information on this product to be accurate. However since we cannot anticipate or control the conditions under which this information or our products may be used we cannot guarantee results obtained through their use. Tests of our
products should be made by users to determine the suitability of these products for a specific purpose. The products are sold without warranty either express or implied. The purchaser should refer to General Formulations Incs Price List for Terms and Conditions or Sale Including Disclaimer of Warranties and Limitation of Liability.