Skip to content

General Formulations Concept® 240 AutoMark

Product Bulletin Concept 240 MATTE OVERLAMINATING FILM Concept 240 Matte Overlaminating Film is a conformable pressure sensitive 2.4-mil matte clear PVC film with clear 2005002 permanent acrylic adhesive on a bleached kraft 53 over laminate liner. This vinyl film offers protection from ultra violet radiation moisture and other environmental exposures. It is laminated by the cold laminating process without the addition of heat. Applications Concept 240 matte overlaminating vinyl film is designed to protect digital image prints and screen printed images for vehicle wraps and graphics exhibit and display graphics. Can be used in most instances where an UV overlay with a matte finish is required. Concept 240 series is recommended for use with Concept 230 AutoMark wrap media. Thickness Film Adhesive Liner Thickness variance - 10 Dimensional Stability Good. Temperature Ranges Minimum application temperature Service temperature range Adhesion To stainless steel 40 ozin. When tested according to PSTC-101 Method A with 24 hr. dwell at 70F and 50 relative humidity. Typical values. Individual values may vary. Test thoroughly before production. Light Transmission Approximately 85 Gloss 60 Gardner Initial 10 2.4 mils8 to 1.1 mils. 4.0 mils. 40 F -40F to 180F. Expected Exterior Exposure Concept 240 is a premium vinyl film that incorporated UV stabilizers in its formulation. Under normal exposure conditions up to 5 years resistance can be expected. Storage Stability 1-year shelf life when stored at 70F and 50 relative humidity. Product Series 240-54 240-60 54 x 150 60 x 150 Manufacturer of Pressure Sensitive Films Traffic Graffic Floor Advertising Films Custom Coatings and Printing Inks. We believe the information on this product to be accurate. However since we cannot anticipate or control the conditions under which this information or our products may be used we cannot guarantee results obtained through their use. Tests of our products should be made by users to determine the s

uitability of these products for a specific purpose. The products are sold without warranty either express or implied. The purchaser should refer to General Formulations Incs Price List for Terms and Conditions or Sale Including Disclaimer of Warranties and Limitation of Liability.