General Formulations Concept® 105
P r od u c t B u l l e t i n GF 105 High Gloss Laminating Film GF 105 is a 2.0 mil High Gloss Overlaminating Film with an optically clear permanent acrylic adhesive on a 1.5 mil polyester film liner. This polyester film offers protection from abrasion moisture and other environmental exposures. It is laminated by the cold laminating process without the addition of heat. Applications High Gloss overlaminating polyester film is designed to protect digital image prints and screen-printed images for exhibit and display graphics. May also be used to protect printed signage both interior and exterior. This film can be used to enhance image clarity contrast and brilliance. Thickness Film 2.0 mils. Adhesive .8 to 1.1 mils. Liner 1.5 mils. Thickness variance - 10 Dimensional Stability Good. Temperature Ranges Minimum application temperature Service temperature range Adhesion To stainless steel 40 F. -40F to 200F. 48 ozin. When tested according to PSTC-1 with 24 hr. dwell at 70F and 50 relative humidity. Typical values. Individual values may vary. Test thoroughly before production. Exterior Durability The polyester film and adhesive have good resistance to discoloration caused by exterior exposure. Under normal exterior exposure conditions Concept 105 could protect the under-laying graphics for up to 2-years from fading caused by typical exterior exposure conditions. Light Transmission Approximately 84 550nms. Gloss 60 Gardner 100. Storage Stability 1-year shelf life when stored at 70F and 50 relative humidity. Product Codes 105-31 105-38 105-51 31 X 150 roll 38 X 150 roll 51 X 150 roll 105-54 105-61 54 X 150 roll 61 X 150 roll Manufacturers of Pressure Sensitive Films We believe the information on this product to be accurate. However since we cannot anticipate or control the conditions under which this information or our products may be used we cannot guarantee results obtained through their use. Tests of our products should be made by users to determine the suitability of
these products for a specific purpose. The products are sold without warranty either express or implied. The purchaser should refer to General Formulations Incs Price List for Terms and Conditions or Sale Including Disclaimer of Warranties and Limitation of Liability.