Delrin 527UV black

DELRIN 527UV black - Stock Shapes rods plates tubes Chemical Designation POM-H Polyacetal Homopolymer Colour black Density 1.41 gcm3 Main features very good UV and weather resistance improved surface hardness good machinability very good mechanical strength Target Industries automotive industry agricultural machinery construction industry solar systems Fillers UV stabilizer Mechanical properties condition value Modulus of elasticity tensile test 73 F 420000 psi ASTM D 638 Tensile strength at yield 73 F 10300 psi ASTM D 638 Elongation at break tensile test 73 F 15 ASTM D 638 Flexural strength 73 F 13500 psi ASTM D 790 Modulus of elasticity flexural test 73 F 490000 psi ASTM D 790 Impact strength Izod 73 F 1.25 ft-lbsin ASTM D 256 Rockwell hardness M Scale 89 Rockwell hardness R Scale 120 ASTM D 785 Thermal properties condition value test method Melting temperature test method comment ASTM D 785 comment 352 F - 1 Deflection temperature 66 psi 325 F ASTM D 648 2 Deflection temperature 264 psi 198 F - 3 Service temperature Long Term 185 F - 4 6.110 -5 ininF - 5 Thermal expansion CLTE Other properties condition value Moisture absorption 24 hrs 73 F 0.14 Flammability UL94 test method HB comment ASTM D 570 - 1 Injection molded data 2 Injection molded data 3 Injection molded data 4 Injection molded data 5 Injection molded data 1 1 Data obtained from public source Resin specification ASTM D6778-06 POM0132 superseding ASTM D4181-00 POM132 Shapes specification ASTM D6100 POM01601222434 This information reflects the current state of our knowledge and is intended only to assist and advise. It is given without obligation or liability. It does not assure or guarantee chemical resistance quality of products or their suitability in any legally binding way. Values are not minimum or maximum values but guidelines that can be used for comparative purposes in material selection. They are within the normal range of product properties and do not represent guaranteed property va

lues. Testing under individual application circumstances is always recommended. Data is obtained from extruded shapes material unless otherwise noted. References to FDA compliance refer to the resins from which the products were made unless otherwise noted. All trade and patent rights should be observed. All rights reserved. Data sheet values are subject to periodic review the most recent update can be found at www.ensingerplastics.com. Ensinger Inc. Headquarters 365 Meadowlands Boulevard Washington PA 15301 USA Phone 800-243-3221 Sales Phone 800-869-4029 Technical Fax 724-746-9209 salesensingerusa.com Date 20160621 Version A0