SIGN ACCESSORIES CHANNEL BOND POLYCARBONATE ADHESIVE Proprietary Product. Use with our 49 Hypo Glue Applicator SPECIFICATIONS Part Number Description 86945 Quart 86947 Gallon Only ships via PalletLTL. Use 49 Hypo Glue Applicator with Channel Bond Adhesive. FEATURES For use with polycarbonate and sign trim CAB in channel letters Bonds polycarbonate to polycarbonate acrylic to polycarbonate sign trim CAB to polycarbonate modifed acrylic DR to polycarbonate and modified acrylic DR to acrylic Quick setting High strength One part system Available in quarts and gallons APPLICATION INSTRUCTIONS FOR CHANNEL BOND QUICK SETTING HIGH STRENGTH ADHESIVE Before Use Channel Bond is a One-Part Adhesive System. Use a 49 Hypo Applicator pink tip bottle to apply. Store in the original container when not in use. Keep lid tight. Store where the temperature is between 32F to 80F. Read the health and safety information on the container before using. Be sure surfaces to be bonded are clean and smooth. The shelf life of this product when stored properly is 2-12 months. Try a small test on extrascrap material before going into production. HOW TO APPLY ON THE FOLLOWING MATERIALS Sign Trim Cellulose Acetate Butyrate to Polycarbonate 1. Fix Sign Trim around polycarbonate per your normal retention fixture method. Apply a uniform bead between the Sign Trim and polycarbonate by flexing the Sign Trim to allow Channel Bond to flow down in-between materials. Bond should be strong after 10-15 minutes. 2. Apply a second uniform bead around the edge between the Sign Trim and polycarbonate material. 3. After 5-10 minutes remove material from the retention fixture and add a third thin uniform bead around the front between the Sign Trim arrow profile and polycarbonate face provided that there is no vinyl applied on the first surface. Polycarbonate to Polycarbonate Apply a uniform bead to the bonding area. Hold parts together securely while adhesive sets up. Bond should be strong after 15-60 min
utes depending on the shape and size area to be bonded. Maximum strength after four hours. Acrylic to Polycarbonate Apply a uniform bead to the bonding area. Hold parts together securely while adhesive sets up. Bond should be strong after 60 minutes depending on the shape and size area to be bonded. Sign Trim Cellulose Acetate Butyrate to Acrylic 1. Fix Sign Trim around acrylic per your normal retention fixture method. Apply a uniform bead of Resin Bond between the Sign Trim and acrylic. 2. Apply a second uniform bead with Channel Bond around the edge between the Sign Trim and acrylic material. After 5-10 minutes remove material from the retention fixture. 3. Add a third thin uniform bead around the front between the Sign Trim narrow profile and the acrylic face when the material width exceeds 3 feet. For Modified Acrylic DR to Polycarbonate see Acrylic to Polycarbonate. For Modified Acrylic DR to Acrylic see Acrylic to Polycarbonate.
