- KYDEX 1900
KYDEX® 1900 is a proprietary thermoplastic sheet with improved heat distortion temperature for higher in-service temperatures. It meets Federal Aviation Regulation (FAR) 25.853(a) for vertical burn and is available in a wide range of textures, colors, thicknesses, and sheet sizes.
Proprietary thermoplastic sheet for aircraft interiors where
higher service temperatures are required.
General Information:
KYDEX® 1900 is a proprietary thermoplastic sheet with improved
heat distortion temperature for higher in-service temperatures. It
meets Federal Aviation Regulation (FAR) 25.853(a) for vertical burn
and is available in a wide range of textures, colors, thicknesses,
and sheet sizes. Maximum recommended service temperature is
approximately 169-178° F (76-81° C) depending on thermoforming
technique and application.
Features:
- KYDEX® 1900 is available in gauges from .040" (1.02mm) to
.250"(6.35mm) in a wide range of distinctive textures and many
popular colors.
- KYDEX® 1900 meets the requirements of the Federal Aviation
Administration paragraph a1ii and a1Ii in all gauges for vertical
burn.
- Heat Distortion Temperature (HDT), which is one measure of the
material's maximum service temperature is 168°F (76°C) unannealed
and a high 173°F (78°C) after annealing. In-use temperatures should
not exceed this range of temperature. The affect of temperature on
a material is highly dependent on part size, internal stresses, and
loadings.
- Thermoformability: Excellent forming properties results in
uniform wall thicknesses and crisp detail, plus easy machining and
fabricating using conventional methods, further expanding finished
part possibilities.
- RIPH: KYDEX® sheet is endorsed by the Royal Institute of Public
Health for conformance to the standard of Hygienic Merit
Applications:
- Aircraft interior components
- Equipment Housings
- Miscellaneous Applications
Certifications:
FAR 25.853 (a) 60s, 12s (Aircraft Rating)
Textures:
- P-E SMOOTH NAP
- P-7 STIPPLE
- P-F LEVANT
- P-H SEVILLE
- P-C LEVEL HAIRCELL
- P-3 VELOUR MATTE
- P-8 SUEDE
- P-1 HAIRCELL
- P-G CONTOUR
Thicknesses:
.028" (0.7mm)
.040" (1.0mm)
.060"(1.5mm)
.080"(2.0mm)
.093"(2.4mm)
.125"(3.2mm)
.156"(4.0mm)
.187"(4.8mm)
.250"(6.4mm)
.312"(7.9mm)
.325"(8.3mm)
.375"(9.6mm)
.425"(10.8mm)
.500"(12.7mm)
Colors and Patterns:
Calcutta Black, Black, Chocolate, Pastel Blue, Cabernet, Dusty
Rose, Orange, Bordeaux, Cocoa, Misty Mauve, Polar White, Angora,
Sandy Beach, Daybreak, Snowflake, Monterey, Ivory, Red, Rooster
Red, Beige, Treasure Chest, Amethyst, Mystic Green, Peacock Blue
Thunder, Twilight, Canyon Blue, Cadet Blue, Buoyant Blue,
Parchment, Pinstripe, Dark Gray, Pewter Gray, Rouge, Custom-matched
colors, Over 2000 custom colors
